Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Pedals

Crank Brothers Shoe Shields
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
Crank Brothers Tread Contact Sleeves
$9.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.
Sunlite ATB Toe Clips and Straps
$9.99
- Nylon clips - Woven straps - For ATB or hybrid use
Sunlite Pedal Blocks
$9.99
- Fits most platform pedals - Two wooden riser blocks w/durable rubber band - Adds 3/4" to each side (1-1/2" total)
Wheels Manufacturing Inc. Pedal Washers
$10.75
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
Sunlite ATB Pedals
$10.99
- Plastic nylon molded body - Chromoly spindle - 318g pair
Sunlite Juvenile Pedals
$11.99
- One-piece resin body - Juvenile size platform - Boron spindle - 390g pair
Odyssey Twisted PC Pedals
$13.99 - $19.99
One of the most successful and popular pedals, and for good reason with its extremely simple, lightweight, inexpensive and famously durable plastic-bodied design. Often duplicated but never replicated. - High-strength plastic composite
Crank Brothers Traction Pads for Mallet E
$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
Sunlite Classic Block Pedals
$14.99 - $20.99
- Galvanized steel pedal body - 2-piece block platform - Boron axle - Plastic blocks w/ integrated reflector - 553g pair
Delta Foot Fenders
$15.99
- Strapless design is easy to engage without fully committing to the pedal - No special shoes required - Improves pedaling efficiency - Molded from unbreakable nylon - Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase - Includes mounting hardware. Note: metal plate may not be required during installation.
Sunlite Comfort Grips ABS Pedals
$15.99
- One-piece ABS resin body - Non-slip rubber surface - Boron spindle - 388g pair
Sunlite Cruiser 990 Pedals
$15.99
- One-piece resin body with rubber surface for grip - Boron spindle - 446g pair
Shimano SM-SH56 Multi-Release SPD Cleat Set
$19.99
Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. - Not compatible with Shimano PD-M858 (XTR) SPD pedals
Crank Brothers Pedal Refresh Kit - Stamp
$24.99
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
Sunlite Sport Road Pedals
$24.99
- 1-piece Polypropylene composite construction platform - 91mm x 140mm platform - Ball bearing system, loose ball - 9/16" Boron steel axle - Includes toe clip and straps - Weight: 302g per pair
Time ATAC Cleats 13/17-degree
$25.00
The ATAC cleats are developed for the TIME mountain bike pedal range (MX and XC range). By switching right and left cleats, you can choose two options for the release angle: 13-degrees or 17-degrees. - Weight: 45g/pair
Crank Brothers Premium MTB Cleats
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability. - SPD compatibility - Weight (pair): 30g - Float: 6 degrees - Release angle: 15 or 20 degrees
Black Ops Platform Pedals
$29.99 - $34.79
These forged alloy platform pedals feature a durable chromoly spindle and replaceable pins. - Toe clip compatible - Loose ball bearings - 599g/pair
Sunlite Low Profile Alloy ATB Pedals with Toe Clips
$29.99
- Forged alloy body and cage - Chromoly spindle - Toe clip compatible (clips included) - 504g pair - 9/16-inch spindle
Shimano SPD-SL Cleat Set
$34.00
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
Race Face Ride Pedal
$34.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"
Bontrager Line Elite MTB Pedal
$49.99
MTB flat pedals with a durable nylon design and replaceable pins for consistent grip. Confident and durable Most downhillers, dirt jumpers, and enduro riders prefer flat pedals, but any trail rider can appreciate the benefits of the Line Elite MTB pedal. It features a durable nylon body and solid platform with replaceable traction pins, so every time you place your foot your shoe stays put. It also has a durable axle and sealed cartridge bearings to ensure lasting performance. - Durable nylon body with a proven shape for comfort and confidence - Durable axle spins on sealed cartridge bearings - Replaceable steel traction pins - Install with either 6mm hex or standard 15mm pedal wrench - Spindle diameter: 9/16-inch
Crank Brothers Stamp 1 Large LE
$49.99
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction pins: 9 per side (mounted from back) - Inner Bearing type: Igus LL-glide bearing - Outer Bearing type: Enduro cartridge bearing - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Race Face Chester Pedal
$49.99
Here For The Party A party's just not a party until Chester shows up. This burly nylon-composite pedal is big on features, small on price, and fully ready to tear up some trail. A concave body, replaceable traction pins, and a cro-mo sealed axle are all representing. The Full Meal Deal A slim yet durable nylon-composite body is accented with a concave design, built-in traction treads and 8 replaceable traction pins per side. Not Just Another Axle Made to stand up to punishment, the durable sealed cro-mo axle rolls on a completely serviceable bearing + bushing set-up. Bling For Your Bike No build is complete without sick looking color-Coordinated pedals. Chester pedals come in multiple vibrant colors to choose from. Specs - Platform Height: 18.4mm - # of Pins: 16 SHCS hex traction pins per pedal (8 per side) - Platform L x W: 101 x 110mm - Axle Material: Chromoly Steel - Body Material: Nylon Composite - Material: Nylon Composite - Weight: 360g
Sunlite Clipless 1 Pedals
$49.99
Sunlite's Clipless I Pedals are perfect for people who who use 1 bike to do it all. On one side you've got a flat side that works with any shoes. This side is perfect for quick errands and short rides. The other side is SPD compatible for long commutes and weekend rides. Now your pedals can do it all as well. - 9/16" spindle
Shimano PD-M520 Pedals
$50.00
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability. - 380 grams (pair)
HT Pedals PA03A Nano-P Pedals
$55.00
HT's PA03A pedals. Large platform, sealed bearings, and a concave shape. - Platform 107 X 105 X 18mm - Nylon-reinforced composite body - 10 replaceable pins per side - 9/16"
Crank Brothers Candy 1
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
Crank Brothers Eggbeater 1
$59.99
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
Page 1 of 2 Next page